Vilo Mesh router review: cheap and reliable

[ad_1]

Vilo router supports IEEE 802.11a/b/g/n/ac.Does not support the latest ax Standard, also known as Wireless network 6Considering that you need to upgrade all devices to enable Wi-Fi 6, this is not a big deal, but it is a good addition to future proof.In terms of security, it does not use the latest WPA3 protocol, But WPA2 (Wi-Fi Protected Access 2). Like Wi-Fi 6, WPA3 is still relatively new, so this is not surprising. But it does make passwords harder to crack, and it is easier and safer to connect to devices without a screen, so it is an ideal upgrade you want.

Each router has four built-in antennas and supports multi-user, multiple input, multiple output (MU-MIMO), which makes it better to handle multiple devices connected to the router at the same time. There is also beamforming to concentrate the wireless signal on the device.

The Vilo system enables frequency band control by default, which means it will choose the frequency band (2.4 GHz or 5 GHz) that it thinks is suitable for each device, but both will show the same network name. This may cause problems when setting up smart home devices.mine Nano leaf light boardFor example, only connect to 2.4 GHz, but you also need to set them to connect to the same frequency band phone. Fortunately, Vilo allows you to turn off the band steering, so you can split the band. I did this temporarily to set up some devices before turning it on again.

Your mileage will vary based on your settings. For me, the limit was the speed of the Internet entering my home, but the Vilo system did a good job of spreading the available bandwidth, and I did not experience any random disconnections during the three-week test. This is not to say that I don’t have any problems.

Seize

The app is smooth, but it may be slow to load or update after you make changes. Sometimes it takes a few minutes to update the current status. Even if you have successfully changed some content, it may take a while to display correctly.

During the setup process, in order to avoid reconnecting to many of my smart home devices, I plan to provide the Vilo system with the same name and password as my previous Wi-Fi network. Unfortunately, it refuses to accept the password and does not work. The good news is that this proved to be a bug that the company quickly fixed through firmware updates.

Nor can it be forcibly connected to a specific router. This is usually not a problem, because the device will connect to the nearest option for the best speed, but my desktop computer is always connected to a router that is farther on the 2.4 GHz band instead of the nearest router on the 5 GHz band like me. look forward to. The firmware update also improves this, although it still occasionally connects to the router upstairs.

Because the company is so new, it’s normal to see some of these problems, but it’s nice to see Vilo actively solve them quickly. Hope this will continue throughout the warranty period of the router.

[ad_2]

Source link

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker